1 Zone Panels

We offer four types of One Zone Panels, Two, 120K BTU Panels (Low Temp and High Temp), and Two, 190K BTU Panels (Low Temp and High Temp). Low Temp panels are used for Tubing In Concrete Emitter Applications as the water delivery temperatures on these systems should never be above 130° F. When a much hotter water delivery temperature is need for applications such as Baseboard, Radiators or Staple Up, the High Temp Panels are needed. The main difference of these systems, separating them between Low Temp and High Temp, is the Y-Strainer on the system. Low Temp panels use a Clear Y-Strainer and the High Temp Panels use a Brass Y-Strainer. A one zone panel requires 1 Thermostat. Always conduct a proper BTU heat loss before selecting a radiant heating system.

Select A Panel Below

HSPS120LT

HSPS120HT

HSPS190LT

HSPS190HT

# Of Zones/Thermostats: 1

 

Max BTU: 120K

 

Emitter Types: Tubing In Concrete

 

Master Supply: 1"

 

Master Return: 1"

 

Supply From Boiler: 3/4"

 

Return To Boiler: 3/4"

 

Max Fluid Temp: 155° F

 

Zone Panel Required: No

 

Square Footage: Up to 3500 Sq. Ft.

 

The HSPS120LT is a one zone, low temperature integrator panel for radiant heat. This panel is designed for Tubing in Concrete emitters such as Embedded Concrete or Staple Down/Pour Over. It features Primary/Secondary plumbing, expansion tank, clear y-strainer, supply and return pressure/temperature gauge, and other components necessary to ensure your system runs correctly.

# Of Zones/Thermostats: 1

 

Max BTU: 120K

 

Emitter Types: Tubing In Concrete, Baseboard, Radiator, Staple Up

 

Master Supply: 1"

 

Master Return: 1"

 

Supply From Boiler: 3/4"

 

Return To Boiler: 3/4"

 

Max Fluid Temp: 190° F

 

Zone Panel Required: No

 

Square Footage: Up to 3500 Sq. Ft.

 

The HSPS120HT is a one zone, high temperature integrator panel for radiant heat. This panel is designed for Tubing in Concrete emitters such as Embedded Concrete or Staple Down/Pour Over, Baseboard, Radiators, or Staple Up. It features Primary/Secondary plumbing, expansion tank, brass y-strainer, supply and return pressure/temperature gauge, and other components necessary to ensure your system runs correctly.

# Of Zones/Thermostats: 1

 

Max BTU: 190K

 

Emitter Types: Tubing In Concrete

 

Master Supply: 1"

 

Master Return: 1"

 

Supply From Boiler: 1"

 

Return To Boiler: 1"

 

Max Fluid Temp: 155° F

 

Zone Panel Required: No

 

Square Footage: Up to 6000 Sq. Ft.

 

The HSPS190LT is a one zone, low temperature integrator panel for radiant heat. This panel is designed for Tubing in Concrete emitters such as Embedded Concrete or Staple Down/Pour Over. It features Primary/Secondary plumbing, expansion tank, clear y-strainer, supply and return pressure/temperature gauge, and other components necessary to ensure your system runs correctly.

# Of Zones/Thermostats: 1

 

Max BTU: 190K

 

Emitter Types: Tubing In Concrete, Baseboard, Radiator, Staple Up

 

Master Supply: 1"

 

Master Return: 1"

 

Supply From Boiler: 1"

 

Return To Boiler: 1"

 

Max Fluid Temp: 190° F

 

Zone Panel Required: No

 

Square Footage: Up to 6000 Sq. Ft.

 

The HSPS190HT is a one zone, high temperature integrator panel for radiant heat. This panel is designed for Tubing in Concrete emitters such as Embedded Concrete or Staple Down/Pour Over, Baseboard, Radiators, or Staple Up. It features Primary/Secondary plumbing, expansion tank, brass y-strainer, supply and return pressure/temperature gauge, and other components necessary to ensure your system runs correctly.

E-mail: info@hydro-smart.com

PH: 763-331-3066