"Radiant Heating Solutions"

Zoning By Pumps

We offer four types of Zoning By Pumps Master Panels, Two, 120K BTU Panels (Low Temp and High Temp), and Two, 190K BTU Panels (Low Temp and High Temp). Low Temp panels are used for Tubing In Concrete Emitter Applications as the water delivery temperatures on these systems should never be above 130° F. When a much hotter water delivery temperature is need for applications such as Baseboard, Radiators or Staple Up, the High Temp Panels are needed. The main difference of these systems, separating them between Low Temp and High Temp, is the Y-Strainer on the system. Low Temp panels use a Clear Y-Strainer and the High Temp Panels use a Brass Y-Strainer. Your number of thermostats will be based of the number of zones you have. For example, a 2 Zone System will require 2 Thermostats, a 3 Zone System will require 3 Thermostats, and a 4 Zone System will require 4 Thermostats. Zoning Panels will work with any of the 4 Master Panels. One Temp panels are used for systems with only one emitter type. Two Temp panels are used for multiple emitter types that require significantly different water delivery temperatures. For Example: You would need a Two Temp Zone Panel if you had a zone(s) that was Baseboard, and another zone(s) that was Tubing In Concrete. If your system only has one emitter type, i.e. ONLY Baseboard or ONLY Tubing In Concrete, then you would only need a one temp zoning panel.

Select A Panel Below

Up to 4 Zones

HSPS120MPL

HSPS120MPH

HSPS190MPL

HSPS190MPH

# Of Zones/Thermostats: Up to 4

 

Max BTU: 120K

 

Emitter Types: Tubing In Concrete

 

Master Supply: 1"

 

Master Return: 1"

 

Supply From Boiler: 3/4"

 

Return To Boiler: 3/4"

 

Max Fluid Temp: 155° F

 

Zone Panel Required: Yes

 

Square Footage: Up to 3500 Sq. Ft.

 

The HSPS120MPL is a multi zone, low temperature integrator panel for radiant heat when zoning by pumps. This panel is designed for Tubing in Concrete emitters such as Embedded Concrete or Staple Down/Pour Over. It features Primary/Secondary plumbing, expansion tank, clear y-strainer, supply and return pressure/temperature gauge, and other components necessary to ensure your system runs correctly. This panel requires an additional Zone Panel.

# Of Zones/Thermostats: Up to 4

 

Max BTU: 120K

 

Emitter Types: Tubing In Concrete, Baseboard, Radiator, Staple Up

 

Master Supply: 1"

 

Master Return: 1"

 

Supply From Boiler: 3/4"

 

Return To Boiler: 3/4"

 

Max Fluid Temp: 190° F

 

Zone Panel Required: Yes

 

Square Footage: Up to 3500 Sq. Ft.

 

The HSPS120MPH is a multi zone, high temperature integrator panel for radiant heat when zoning by pumps. This panel is designed for Tubing in Concrete emitters such as Embedded Concrete or Staple Down/Pour Over, Baseboard, Radiator, or Staple Up. It features Primary/Secondary plumbing, expansion tank, brass y-strainer, supply and return pressure/temperature gauge, and other components necessary to ensure your system runs correctly. This panel requires an additional Zone Panel.

# Of Zones/Thermostats: Up to 4

 

Max BTU: 190K

 

Emitter Types: Tubing In Concrete

 

Master Supply: 1"

 

Master Return: 1"

 

Supply From Boiler: 1"

 

Return To Boiler: 1"

 

Max Fluid Temp: 155° F

 

Zone Panel Required: Yes

 

Square Footage: Up to 6000 Sq. Ft.

 

The HSPS190MPL is a multi zone, low temperature integrator panel for radiant heat when zoning by pumps. This panel is designed for Tubing in Concrete emitters such as Embedded Concrete or Staple Down/Pour Over. It features Primary/Secondary plumbing, expansion tank, clear y-strainer, supply and return pressure/temperature gauge, and other components necessary to ensure your system runs correctly. This panel requires an additional Zone Panel.

# Of Zones/Thermostats: Up to 4

 

Max BTU: 190K

 

Emitter Types: Tubing In Concrete, Baseboard, Radiator, Staple Up

 

Master Supply: 1"

 

Master Return: 1"

 

Supply From Boiler: 1"

 

Return To Boiler: 1"

 

Max Fluid Temp: 190° F

 

Zone Panel Required: Yes

 

Square Footage: Up to 6000 Sq. Ft.

 

The HSPS190MPH is a multi zone, high temperature integrator panel for radiant heat when zoning by pumps. This panel is designed for Tubing in Concrete emitters such as Embedded Concrete or Staple Down/Pour Over, Baseboard, Radiator, or Staple Up. It features Primary/Secondary plumbing, expansion tank, brass y-strainer, supply and return pressure/temperature gauge, and other components necessary to ensure your system runs correctly. This panel requires an additional Zone Panel.

E-mail: info@hydro-smart.com

PH: 763-331-3066