VT2218-HY2-4C1A00 ECM Circulator Pump, Cast Iron

The VT2218 is a temperature sensing, variable speed, high-efficiency wet rotor circulator with an ECM permanent magnet motor. It’s ideal for Delta-T or setpoint temperature applications.  Typical uses include hydronic systems zoned with zone valves, radiant loops, injection pumping, snowmelt or hydro-air fan coils.  Can also be used in constant speed mode for zoning with circulators, indirect water heaters or primary boiler loops.

•Maximum Shut-off Head: 22 feet 
• Maximum Flow: 18 gpm
• Maximum Operating Pressure: 125 psi (862 kPa)
• Maximum Water Temp: 230°F (110°C)
• Minimum Water Temp: 36°F (2°C)
• Electrical specifications:
     Voltage: 110-120V, 50/60 Hz, Single phase
     Operating Power Range: 9W to 58W
     Maximum AMP Rating: 0.67 
• Equipped with a cast iron casing and should be used for closed loop systems only.
• Taco circulator pumps are for indoor use only
• Acceptable for use with water or maximum of 50% water/glycol solution.